Tweet
http://blogg.carsnaudio.com/archives/1722
Features:
ImprintEQ
With fully Manual Tuning built-in, same as F#1 Status and H701, tuning is done via the new RUX or the PC Software. Alpine’s automatic sound tuning technology — Using the supplied omni-directional microphone, measurements are taken from various locations in the car. The resulting data is used to automatically correct any in-car acoustical problems and then apply the desired target sound curve.
AntEQ
Removes the factory head unit equalization, leaving a blank slate for these subsequent steps
Road EQ
automatically corrects for external noise in real time
MediaXpander™ Plus
Improves the playback of compressed media and restores high-frequency audio data
User Customization
Gives the user the option to customize the sound via manual or automatic settings – Using either the RUX-C800 controller (sold separately) or a PC with the included tuning software, manual, target curve and post process tuning can be made. The user can customize the sound traditionally by hand or automatically tune it to a desired response, while also allowing for full adjustment for fine tuning afterwards.
Dual Optical Input
Ai-Net Input + Ai-Net Aux
Ai-Net Connection to INA-W910
Preset, sub Level and Balance/Fader
6CH Input
RCA or SPK Input – Up to 10V Input
8CH Fully Active Output
4V Output
10 Band Parametric EQ
On Front Rear and Center channel (vs 5 on H701)
5 Band Parametric EQ
For Subwoofer (vs 2 on H701)
36dB XO Slopes
Huge Signal-to-Noise Improvement
110 Digital / 105 Analog
Features:
ImprintEQ
With fully Manual Tuning built-in, same as F#1 Status and H701, tuning is done via the new RUX or the PC Software. Alpine’s automatic sound tuning technology — Using the supplied omni-directional microphone, measurements are taken from various locations in the car. The resulting data is used to automatically correct any in-car acoustical problems and then apply the desired target sound curve.
AntEQ
Removes the factory head unit equalization, leaving a blank slate for these subsequent steps
Road EQ
automatically corrects for external noise in real time
MediaXpander™ Plus
Improves the playback of compressed media and restores high-frequency audio data
User Customization
Gives the user the option to customize the sound via manual or automatic settings – Using either the RUX-C800 controller (sold separately) or a PC with the included tuning software, manual, target curve and post process tuning can be made. The user can customize the sound traditionally by hand or automatically tune it to a desired response, while also allowing for full adjustment for fine tuning afterwards.
Dual Optical Input
Ai-Net Input + Ai-Net Aux
Ai-Net Connection to INA-W910
Preset, sub Level and Balance/Fader
6CH Input
RCA or SPK Input – Up to 10V Input
8CH Fully Active Output
4V Output
10 Band Parametric EQ
On Front Rear and Center channel (vs 5 on H701)
5 Band Parametric EQ
For Subwoofer (vs 2 on H701)
36dB XO Slopes
Huge Signal-to-Noise Improvement
110 Digital / 105 Analog
Comment